Перейти к публикации
droid95

А на каком железе играете вы ?

Рекомендованные сообщения

azq2@zhumarin:~$ cat /proc/cpuinfo
processor    : 0
vendor_id    : AuthenticAMD
cpu family    : 16
model        : 6
model name    : AMD Athlon(tm) II X2 220 Processor
stepping    : 3
microcode    : 0x10000c8
cpu MHz        : 2800.000
cache size    : 512 KB
physical id    : 0
siblings    : 2
core id        : 0
cpu cores    : 2
apicid        : 0
initial apicid    : 0
fpu        : yes
fpu_exception    : yes
cpuid level    : 5
wp        : yes
flags        : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save
bogomips    : 4500.01
TLB size    : 1024 4K pages
clflush size    : 64
cache_alignment    : 64
address sizes    : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

processor    : 1
vendor_id    : AuthenticAMD
cpu family    : 16
model        : 6
model name    : AMD Athlon(tm) II X2 220 Processor
stepping    : 3
microcode    : 0x10000c8
cpu MHz        : 800.000
cache size    : 512 KB
physical id    : 0
siblings    : 2
core id        : 1
cpu cores    : 2
apicid        : 1
initial apicid    : 1
fpu        : yes
fpu_exception    : yes
cpuid level    : 5
wp        : yes
flags        : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save
bogomips    : 4500.01
TLB size    : 1024 4K pages
clflush size    : 64
cache_alignment    : 64
address sizes    : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

 

 

azq2@zhumarin:~$ sudo hdparm -I /dev/sda
[sudo] password for azq2:

/dev/sda:

ATA device, with non-removable media
   Model Number:       Hitachi HDS721050CLA362               
   Serial Number:      JP1532HR32AWSK
   Firmware Revision:  JP2OA50E
   Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6; Revision: ATA8-AST T13 Project D1697 Revision 0b
Standards:
   Used: unknown (minor revision code 0x0029)
   Supported: 8 7 6 5
   Likely used: 8
Configuration:
   Logical        max    current
   cylinders    16383    16383
   heads        16    16
   sectors/track    63    63
   --
   CHS current addressable sectors:   16514064
   LBA    user addressable sectors:  268435455
   LBA48  user addressable sectors:  976773168
   Logical/Physical Sector size:           512 bytes
   device size with M = 1024*1024:      476940 MBytes
   device size with M = 1000*1000:      500107 MBytes (500 GB)
   cache/buffer size  = 14111 KBytes (type=DualPortCache)
   Form Factor: 3.5 inch
   Nominal Media Rotation Rate: 7200
Capabilities:
   LBA, IORDY(can be disabled)
   Queue depth: 32
   Standby timer values: spec'd by Standard, no device specific minimum
   R/W multiple sector transfer: Max = 16    Current = 16
   Advanced power management level: disabled
   DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
       Cycle time: min=120ns recommended=120ns
   PIO: pio0 pio1 pio2 pio3 pio4
       Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
   Enabled    Supported:
     *    SMART feature set
         Security Mode feature set
     *    Power Management feature set
     *    Write cache
     *    Look-ahead
     *    Host Protected Area feature set
     *    WRITE_BUFFER command
     *    READ_BUFFER command
     *    DOWNLOAD_MICROCODE
         Advanced Power Management feature set
         Power-Up In Standby feature set
     *    SET_FEATURES required to spinup after power up
         SET_MAX security extension
     *    48-bit Address feature set
     *    Device Configuration Overlay feature set
     *    Mandatory FLUSH_CACHE
     *    FLUSH_CACHE_EXT
     *    SMART error logging
     *    SMART self-test
         Media Card Pass-Through
     *    General Purpose Logging feature set
     *    WRITE_{DMA|MULTIPLE}_FUA_EXT
     *    64-bit World wide name
     *    URG for READ_STREAM[_DMA]_EXT
     *    URG for WRITE_STREAM[_DMA]_EXT
     *    WRITE_UNCORRECTABLE_EXT command
     *    Segmented DOWNLOAD_MICROCODE
     *    Gen1 signaling speed (1.5Gb/s)
     *    Gen2 signaling speed (3.0Gb/s)
     *    Native Command Queueing (NCQ)
     *    Host-initiated interface power management
     *    Phy event counters
     *    NCQ priority information
         Non-Zero buffer offsets in DMA Setup FIS
         DMA Setup Auto-Activate optimization
         Device-initiated interface power management
         In-order data delivery
     *    Software settings preservation
     *    SMART Command Transport (SCT) feature set
     *    SCT Write Same (AC2)
     *    SCT Error Recovery Control (AC3)
     *    SCT Features Control (AC4)
     *    SCT Data Tables (AC5)
Security:
   Master password revision code = 65534
       supported
   not    enabled
   not    locked
       frozen
   not    expired: security count
   not    supported: enhanced erase
   108min for SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5000cca378eb5827
   NAA        : 5
   IEEE OUI    : 000cca
   Unique ID    : 378eb5827
Checksum: correct

 

azq2@zhumarin:~$ free -m
            total       used       free     shared    buffers     cached
Память:       5969       4187       1781         97        635       1047
-/+ буферы/кэш:       2504       3464
Swap:         6143          0       6143

 

azq2@zhumarin:~$ lspci
00:00.0 RAM memory: NVIDIA Corporation MCP61 Host Bridge (rev a1)
00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2)
00:01.3 Co-processor: NVIDIA Corporation MCP61 SMU (rev a2)
00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3)
00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3)
00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2)
00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
02:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
02:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
03:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa)
04:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio]
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)

Ссылка на сообщение
Поделиться на других сайтах

:D слышали бы как оно у меня шумит

Кошечка...:3_de2:

Не ищи смысл, это просто фотокарточки🍒

 

 

Ссылка на сообщение
Поделиться на других сайтах

Присоединяйтесь к обсуждению

Вы можете опубликовать сообщение сейчас, а зарегистрироваться позже. Если у вас есть аккаунт, войдите в него для написания от своего имени.
Примечание: вашему сообщению потребуется утверждение модератора, прежде чем оно станет доступным.

Гость
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Ответить в тему...

×   Вставлено в виде отформатированного текста.   Вставить в виде обычного текста

  Разрешено не более 75 эмодзи.

×   Ваша ссылка была автоматически встроена.   Отобразить как ссылку

×   Ваш предыдущий контент был восстановлен.   Очистить редактор

×   Вы не можете вставить изображения напрямую. Загрузите или вставьте изображения по ссылке.

  • Сейчас на странице   0 пользователей

    • Нет пользователей, просматривающих эту страницу.
×
×
  • Создать...